(Pictures will be coming soon)
To4e Turbocharger: From craigslist $125.00
This turbo is not super high quality by any means but it has worked for me very well thus far. Has a 3 inch inlet and 2 inch outlet.
Turbo Manifold and Downpipe: From CX Racing on Amazon.com $149.99
Here's the link.
The manifold is meant for a Mitsubishi turbo which means an adapter from this to the To4e turbo will need to
fabricated. The holes which the exhaust studs go through also will need to be reamed out as they will not fit
the way it comes. The downpipe does not fit whatsoever.
Intercooler: From CX Racing $129.00
Here's the link.
This may not be the most expensive intercooler out there but it works just as good as any other for hundreds of dollars less. The dimesions are 18" by 12" by 3" with 2.5" inlet and outlet diameter.
Blow off valve: From HK5 Motors on Amazon $39.99
Here's the link.
Not the highest quality blow off valve ever, but it works just fine.
Turbo oil feed kit: From CX Racing on Amazon $24.00
Here's the link.
This kit worked well, the hose is longer than it needs to be but it works. The flange to the turbo also has a built in restricter to limit the oil flow which is a good addition. To hook this hose up to the oil feed port on your 1.6 engine you will need n adapter which is the next part.
Turbo oil feed adapter: From Paragon Performance $17.50
Here's the link. The part number is PP-2966.
A very small and hard to find part but an essential one.
Turbo oil drain flange: From CX Racing on Amazon $19.00
Here's the link.
Fits and works well, comes with gasket.
Turbo oil drain line: 5/8 inch ID silicon hose.
Sorry I dont have the link but they are easy to find, I will try and get the link soon.
Make sure to get silicon because normal rubber will not withstand the heat of it oil.
2" Aluminum Intake tubing: From Intake Hoses $16.60
Here's the link. You will need 2 36" pieces.
Works perfect.
2" Rubber elbows: From Intake Hoses $11.97 times 11
Here's the link. You will need 11.
2.5" to 2" rubber adapter: From Intake Hoses $12.85 times 3
Here's the link. You will need 3.
Two of these go onto the intercooler and one fits on the intake manifold.
Exhaust flange for turbo: From Godspeed on Amazon $14.99
Here's the link.
Fits and works well. I used this to weld pipe onto and make a custom exhaust out the hood. Makes for easy fabrication and lots of extra power.
